We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Nedco all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
2510KW1H MANUAL STARTER
Switch, manual, 30A, 2 pole, 3HP at 575VAC, single phase, toggle operated, red 115VAC indicator, NEMA 4, two conduit
2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. They are designed for single or three phase AC motors. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 20A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. A NEMA 4 watertight and dusttight die cast zinc alloy enclosure is used to protect this manual motor switch. This enclosure has one conduit entry on the bottom and one on the top. The 0.75 inch conduit entries are tapped with number 14 pipe threads. This device is 4.38 inches tall, 3.00 inches wide and 4.25 inches deep. A toggle handle is used to turn the manual starter on and off. The toggle handle can be padlocked in the off position. This device is UL Listed and CSA certified.
Switch, manual, 30A, 2 pole, 3HP at 575VAC, single phase, toggle operated, red 115VAC indicator, NEMA 4, two conduit
2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. They are designed for single or three phase AC motors. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 20A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. A NEMA 4 watertight and dusttight die cast zinc alloy enclosure is used to protect this manual motor switch. This enclosure has one conduit entry on the bottom and one on the top. The 0.75 inch conduit entries are tapped with number 14 pipe threads. This device is 4.38 inches tall, 3.00 inches wide and 4.25 inches deep. A toggle handle is used to turn the manual starter on and off. The toggle handle can be padlocked in the off position. This device is UL Listed and CSA certified.
Technical Specifications
Technical Specifications
Lay-In-Duct | |
| Pkg UOM | EA |
|---|---|
| Voltage Rating | 600 VAC, 230 VDC |
| Pkg Type | PK |
| Enclosure | NEMA 4 |
| Additional Information | DC POWER RATING 1 HP AT 90 VDC, 2 HP AT 115 VDC, 1 1/2 HP AT 230 VDC WITH 3/4 INCH TOP/BOTTOM PIPE TAP |
| Mfr UNSPSC | 39121507 |
| Pkg Width | 4.8 |
| Current Rating | 30 AMPERE |
| Pkg Weight UOM | LB |
| Material | DIE CAST ZINC ALLOY |
| Pkg Height | 3.6 |
| Pkg Volume UOM | IN |
| HP at 120 V | 2 HP |
| Catalog Number | 2510KW1H |
| Mfrcode | SQD |
|---|---|
| Product Name | NON REVERSING SWITCH |
| Pkg Length | 5.4 |
| HP at 480 V | 3 HP |
| Operation Type | DOUBLE POLE |
| Pkg Volume | 93.312 |
| HP at 240 V | 2 HP |
| Size | 2 3/4 INCH W X 4 9/16 INCH D X 4 3/8 INCH H |
| Pkg Qty | 1 |
| HP at 600 V | 3 HP |
| Type | 1 PHASE |
| Pkg Weight | 2.92 |
| Mfr Fullname | SQUARE D/TELEMECANIQUE |
| Approval | UL, CSA |