We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Nedco all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
8538SCG14V02S COMB STR
NEMA combination starter, Type S, 30A fusible disconnect, Size 1, 27A, 10HP at 600VAC, 3 phase, 3 pole, 120VAC coil, NEMA 1
Thermal units are intended to protect motors, controllers, and branch-circuit conductors against excessive heating due to prolonged motor over-currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts.
NEMA combination starter, Type S, 30A fusible disconnect, Size 1, 27A, 10HP at 600VAC, 3 phase, 3 pole, 120VAC coil, NEMA 1
Thermal units are intended to protect motors, controllers, and branch-circuit conductors against excessive heating due to prolonged motor over-currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts.
Technical Specifications
Technical Specifications
NEMA AC Combination Starters | |
| Mfr UNSPSC | 39121521 |
|---|---|
| Mfr Fullname | SQUARE D/TELEMECANIQUE |
| Power Rating/Voltage | 10 HP AT 480/600 VAC |
| Disconnect | FUSIBLE |
| Construction Standard | NEMA |
| Overloads | MELTING ALLOY |
| Pkg Volume UOM | IN |
| Pkg Volume | 2794.266 |
| Additional Information | APPROVAL UL NUMBER OF POLE 3 WITH CLASS H FUSE CLIP INCLUDES SEPARATE CONTROL CIRCUIT |
| Pkg Qty | 1 |
| Size | NEMA 1 |
| Phase | 3 |
| Disconnect Amps | 30 AMPERE |
| Pkg Height | 10.6 |
| Mfrcode | SQD |
|---|---|
| Enclosure Type | NEMA 1 |
| Pkg UOM | EA |
| Pkg Length | 26.1 |
| Catalog Number | 8538SCG14V02S |
| Type | FULL VOLTAGE, NON REVERSING |
| Pkg Width | 10.1 |
| Pkg Weight UOM | LB |
| Pkg Type | PK |
| Line Voltage | 480/600 VAC AT 50/60 HZ |
| Coil Voltage | 110 V AT 50 HZ, 120 V AT 60 HZ |
| Pkg Weight | 34.7 |
| Product Name | COMBINATION STARTER |